Aircraft
How do I install the propeller correctly?
The propeller with a white mark on the propeller clamp is installed on the motor with the white mark, and the propeller without the white mark on the propeller clamp is installed on the motor without the white mark.
Can the aircraft be connected to a TF card?
Yes, and the aircraft comes built-in with 8GB internal memory.
What is the maximum wind resistance of the EVO II Pro?
Level 8.
Is the EVO II Pro waterproof?
No.
What is the maximum flight time of the EVO II Pro?
In a steady environment, the max flight time can reach up to 40 minutes.
What is the difference between EVO II and EVO II Pro?
The only difference between the two products is the PTZ camera, and the rest of the performance is the same.
Remote Controller & Image Transmission
What do I do if the image transmission signal becomes weak during flight?
Check your surroundings for potential interference factors and then adjust the orientation of your antennas to enhance signal strength.
What is the effective image transmission distance?
Under the FCC standard, the maximum image transmission distance is 9km; under the CE standard, the maximum image transmission distance is 5 km.
Does the remote controller have custom buttons?
There are two customizable buttons on the back of the remote controller, and 4 functions can be customized through the APP.
What screen does the remote controller use?
A 3.26 inch OLED screen with a resolution of 854*480
How many ports does the remote controller have?
There is a Micro USB port and a Type-A port at the bottom of the remote controller which is used for connecting external devices and charging.
Does the remote controller support HDMI output?
No.
Can the remote controller of EVO II and EVO II Pro interchangeable?
Yes.
Camera
What camera modes are available?
Single shooting, continuous shooting, timing, pure night shooting, long exposure, HDR imaging.
What is the zoom range of the camera?
1-8x zoom, and 3x lossless zoom.
What are the advantages of the EVO II camera when shooting video?
It can shoot 5472×3076 resolution 6K video at a bit rate of 120Mbps, and supports 4K HDR video shooting.
What types of shooting formats does the camera support?
Photo format: JPEG (default) + RAW; Video format: MOV (default) + MP4.
What camera sensor does the EVO II Pro use?
A Sony 1 inch CMOS image sensor with 20M effective pixels.
Can I change the gimbal mount?
Yes.
Battery
Can the battery be carried on board?
The energy of a single battery is 82Wh. According to airline requirements, the battery can be carried on board.
Can the battery be used in a low temperature environment?
Use the battery in a low temperature environment, the battery life will be reduced, please arrange the flight time reasonably. For the best performance of the battery, it is recommended to keep the battery temperature above 15 °C before flying.
How do I maintain the battery?
- Do not expose the battery to temperatures below -10°C or above 40°C, which will shorten the battery life and may cause fire, explosion or other permanent damage;
- Do not charge immediately after flight; it is recommended to charge the battery after it drops to room temperature;
- The ideal charging environment temperature of the battery is 10 °C~30 °C;
- The ideal storage environment temperature of the battery is 22 °C~28 °C. When storing the battery, the surroundings should be clear from water and moisture, and must avoid sunlight;
- Recharge and discharge the battery every 3 months or so to keep the battery active.
Perception System
Can the downward fill light be switched on manually?
It can be turned on or off manually, or it can be automatically turned on or off according to environmental conditions.
How many vision sensors is the aircraft equipped with?
There are 12 in total, with two vision sensors on the front, back, left, right, top, and bottom.
Firmware Upgrade
After downloading the firmware package, can I disconnect the network to upgrade?
Yes.
What are the factors that can cause the upgrade to fail?
- If the device is turned off during the upgrade process, the upgrade will fail.
- If the network is interrupted while downloading the firmware package, the upgrade will fail.
- Only when the remaining battery power of the device is ≥ 50% can the firmware be upgraded.
How to upgrade the firmware?
You can download the firmware package manually through the official website, or update the firmware through the Autel Explorer application.